ZennaTek™ CAMERA COVERS

To provide  basic environmental protection for whatever your camera system, we are producing four different sizes - from handheld all the way up to a cover that the camera operator can get underneath too! We will be posting the photos and spec’s on those soon.  All of them will provide complete rain/snow/sleet protection as well as direct access to the camera from the bottom while the rain-proof, velcro-sealed slots enable you to externalize the viewfinder, LCD display and/or microphone.

and just try wrapping some PVC around an ARRI 435 camera with Optimo 12 lens as shown at right ...

that is a 65lb (29.5Kg) system being lifted within our ultra-tough polymer gripped within just one hand.  

ALL of ZennaTek’s polymer-based products are created from our proprietary, ultra-tough, very clear, extremely elastic, space-age plastic that is unlike ANYTHING you’ve ever experienced. That’s because

the plastic used in common camera covers, and “splash” housings, is still just Polyvinyl Chloride.

(yep, good ol’ fashioned “PVC”)

PVC has a maximum elongation

(i.e: stretch potential before breaking) of just 40% versus our +500% ...

Some like it COLD so, for continued ease-of-use, our polymer doesn’t even begin to lose flexibility until

below -65˚F (-54˚C)!

Since some like it HOT, with our polymer you can to shoot outside even when it is over 300˚F (150˚C).

Draped over HMI light ...

Temp. gauge reads 397˚F   (203˚C)

Most importantly, our ultra-clear polymer enables you to see the ENTIRE camera system and is strong enough for us to make super thin so you can hand control everything; even touch-screens!  (None of which is possible with PVC & canvas covers.)

Lastly, it so efficiently transfers HEAT that now you can safely enclose, and operate, even the hottest running, fan-cooled camera systems without worry.

And now we also have our waterproof Zipper Tube

for use with our ZennaTek™ environmental housing.